Koppla switch vid byte kurvor EPIC

Hjälp,beskrivningar,intressant och lärorikt,koppling av kylslangar trimpipor
Instruktioner,filmer om impeller lagning jetski trim allt från topplock etc

Koppla switch vid byte kurvor EPIC

Inläggav Nesam » 20 september 2011, 18:13

Hittade denna notis från Chris på ATP hur switchen ska stå/kopplas
för att byta mellan A och B kurva.
Översätter inte då det är säkrast ;)

"To access the B curve you switch the pink coming from EPIC to ground, just two wires the third one on the switch is not used. So you have a Pink and black coming from EPIC, these can exit the Ebox via the grommet that was used for the overheat sensor, connect these to the red and white of the rotary switch either way round. When the switch is off you are on A curve,when the switch is on you are on B curve"
Madmans Return.....
Om man tror man kan Allt har man fel...

Kör:Superjet Riva edit -99
Xl 700
Användarvisningsbild
Nesam
Jetski in Sweden VIP
 
Inlägg: 1630
Blev medlem: 2 april 2009, 12:29
Ort: Björbo

Återgå till Special,Trim och "Bling Bling"

Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 4 gäster